Disassembling a Dryer | Dryer Repair Visalia
Every dryer repair requires some disassembly of the dryer. Duh right? But where do you start taking screws out is the question? There are 2 ways into a dryer, through the top and on to the front, or through the back. But don’t take it apart yet there’s a trick to gas dryers that tells you where to start looking.
Remove the lint screen and then remove the screws inside the filter slot.
Using a putty knife, release the two spring catches located under the top panel at the front. Tilt the top panel up like a car hood and remove the screws that hold the front panel in place.