Kenmore Dryer Error Codes

Kenmore 796 model steam dryer error codes

Kenmore

These error code explanations can help you diagnose a problem with your Kenmore steam dryer with a model number beginning with 796. For repair how-to help, visit the PartsDirect repair help section, which includes repair help for dryers, other major appliances, lawn and garden equipment, garage door openers, vacuum cleaners and more. Search for your model number to find a complete list of replacement parts for your dryer.

Error Code

Condition

DIY advice

tE1 or tE2

Exhaust thermistor failure

Check/Repair

Unplug the dryer and check the exhaust thermistor wiring. Reconnect any loose wires or replace the wire harness if damaged. Check the resistance of the exhaust thermistor using a multimeter. You should measure about 10,000 ohms at room temperature. If not then replace the thermistor because it’s defective. Replace the main control board if the exhaust thermistor and wiring are okay.

Possible parts

Exhaust thermistor, Wire harness, Main control board

dE

Door switch error

Check/Repair

Check the operation of the door switch using the diagnostic test mode, which is explained in the tech sheet that’s typically stored in the console of the dryer. Replace the door switch if it doesn’t work.

Possible parts

Door switch

PS

Power supply error

Check/Repair

The power cord on the back of the electric dryer isn’t correctly connected. Unplug the dryer and connect the power cord according to the installation instructions.

Possible parts

tE4

Steam generator thermistor failure

Check/Repair

Unplug the dryer and check the wire harness connections between the steam generator and the main control board. Reconnect any loose wires or replace the wire harness if damaged. If the wire connections are okay, replace the steam generator because it houses the steam generator thermistor. The steam generator thermistor isn’t sold as a separate component.

Possible parts

Steam generator assembly

Add Water

Steam feeder is dry

Check/Repair

Refill the steam feeder with water.

Possible parts

Clipped from: https://www.searspartsdirect.com/diy/error-codes/dryer-repair/1234594/kenmore-796-model-steam-dryer/0582