Maytag Error Codes

Maytag

These error code explanations can help with troubleshooting a problem with your Maytag Bravos dryer. For repair how-to help, visit the PartsDirect repair help section, which includes repair help for dryers, other major appliances, lawn and garden equipment, garage door openers, vacuum cleaners and more. Search for your model number to find a complete list of replacement parts for your dryer.

Error Code

Condition

DIY advice

PF

Power failure

Check/Repair

A power failure occurred while the dryer was running. Press Start to continue the cycle or press Stop to clear the display. If this code frequently appears, check the power cord and replace it if it’s damaged.

Possible parts

Power cord

F-01

Main electronic control board failure

Check/Repair

Unplug the dryer for 5 minutes and the plug the dryer back in. If the code reappears, replace the main electronic control board.

Possible parts

Main electronic control board

F-02

User interface keypad failure

Check/Repair

A stuck button on the user interface control board causes this code. If you can’t free the stuck key, replace the user interface control board.

Possible parts

User interface control board

F-22

Exhaust thermistor failure

Check/Repair

Unplug the dryer. Check the resistance of the exhaust thermistor (temperature sensor). It should measure about 10,000 ohms at room temperature. If the thermistor is defective, replace it.

Possible parts

Thermistor

F-23

Exhaust thermistor failure

Check/Repair

Unplug the dryer. Check the resistance of the exhaust thermistor (temperature sensor). It should measure about 10,000 ohms at room temperature. If the thermistor is defective, replace it.

Possible parts

Thermistor

F-26

Drive motor failure

Check/Repair

Unplug the dryer. Check the wiring connections between the main electronic control board and the drive motor. If the wiring connections are sound, replace the drive motor.

Possible parts

Drive motor

F-28

Moisture sensor failure

Check/Repair

Check the wiring harness connections between the moisture sensor and the main electronic control board. If the wiring connections are sound, replace the moisture sensor.

Possible parts

Moisture sensor

F29

Moisture sensor failure

Check/Repair

Check the wiring harness connections between the moisture sensor and the main electronic control board. If the wiring connections are sound, replace the moisture sensor.

Possible parts

Moisture sensor

Clipped from: https://www.searspartsdirect.com/diy/error-codes/dryer-repair/1234594/maytag-bravos-dryer/3048