Use this webpage if your dryer doesn’t want to spin or turn on anymore and — you’ll save time and frustration.
If you have an electric or gas dryer that tumbles but won’t heat, check the thermal fuse for continuity.
If the thermal fuse checks out move on to the next most likely dryer parts:
High Limit Thermostat
Gas Valve Coils
Grab pliers, a couple of small screwdrivers and a roll of masking tape. Grab the bent or broken latch and yank it out. Then install the new one, pushing in firmly until the locking tabs seat. Occasionally it is not the metal tab it’s the square receptacle that receives the tab that needs to be replaced.
Sometimes simply using a flathead screwdriver to open the gap on the little metal tab that sticks into the door which holds the dryer door closed.
If you have checked all of the dryer parts listed above and you found no problems then it may be your motor…
Does the dryer buzz when push the start button? Check the dryers motor.
https://youtu.be/joopdlgMmaU Defeat Kenmore Washer Lid Switch The Kenmore washing machine lid lock is a safety…