Kenmore Dryer Error Codes

Kenmore 110 series electronic control model dryer error codes

Kenmore

These error code explanations can help you diagnose a problem with your Kenmore dryer with a model number beginning with 110. For repair how-to help, visit the PartsDirect repair help section, which includes repair help for dryers, other major appliances, lawn and garden equipment, garage door openers, vacuum cleaners and more. Search for your model number to find a complete list of replacement parts for your dryer.

Error Code

Condition

DIY advice

PF

Power failure

Check/Repair

A power failure occurred during the cycle. Restart the cycle. If this code appears frequently, check the power cord and the electrical outlet.

Possible parts

Power cord

E1

Thermistor failure

Check/Repair

Unplug the dryer and then check the resistance of the thermistor (temperature sensor). It should measure about 10,000 ohms at room temperature. If the thermistor is defective, replace it.

How-to help

How to replace a dryer thermistor

Possible parts

Thermistor

E2

Thermistor failure

Check/Repair

Unplug the dryer and then check the resistance of the thermistor (temperature sensor). It should measure about 10,000 ohms at room temperature. If the thermistor is defective, replace it.

How-to help

How to replace a dryer thermistor

Possible parts

Thermistor

E3

User interface control panel and main electronic control board mismatch

Check/Repair

This code appears if a replacement control part is incorrect. Check the part numbers of the user interface (control key panel) and the main electronic control board. If the part is incorrect, replace it with the correct part.

Possible parts

User interface, Main electronic control board

Clipped from: https://www.searspartsdirect.com/diy/error-codes/dryer-repair/1234594/kenmore-110-series-electronic-control-model-dryer/0582

%d bloggers like this: