Whirlpool Washer

Repair Articles


About 1138 results

Preventing Excessive Lint on a Washer Load
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Preventing_Excessive_Lint_on_a_Washer_Load
Washing new clothing inside out will help reduce the amount of lint in the cycle. Lint can be trapped in the load if the washer is tightly packed. Always check all pockets and the interior of the wash...

More

Leveling a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Installation_Support/Leveling_a_Front_Load_Washer
When the washer is on a pedestal, the feet must be removed from the washer before installing it onto the pedestal. The black pedestal pads should be securely placed between the top of the pedestal and...

More

Lid Locking on a Top Load High Efficiency Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Lid_Locking_on_a_Top_Load_High_Efficiency_Washer
Lid Locking (or not Locking) on your Whirlpool Top Load HE Washer? The lid must be closed for the washer to fill with water, wash, drain, rinse and spin the load. Close the washer lid before starting ...

More

Water Usage in a Top Load HE Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Water_Usage_in_a_Top_Load_HE_Washer
If you feel that the washer level is lower than when you first started using this washer, try running a Clean Washer cycle. You should run this cycle approximately 1 time per month (using the Affresh®...

More

How to Remove Odors from a Washer
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Product_Information/Stacked_Laundry_Center_Cleaning_and_Care/How_to_Remove_Odors_from_a_Washer
The Clean Washer cycle uses higher water volumes in combination with Affresh® washer cleaner or liquid chlorine bleach to thoroughly clean the inside of the washer. Always leave the washer lid or door...

More

Alexa Washer Commands
https://producthelp.whirlpool.com/Connected_Appliances/Product_Info/Connected_Support/Using_Alexa_with_Your_Appliances/Alexa_Washer_Commands
Alexa Washer Commands Start Washer Alexa, Tell Whirlpool to Start the Washer Stop Washer Alexa, Tell Whirlpool to Stop the Washer Pause Washer Alexa, Tell Whirlpool to Pause the Washer Alexa, Tell Whi...

More

Removing Odors from the Interior of a Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Cleaning_and_Care/Removing_Odors_from_the_Interior_of_a_Washer
The Clean Washer cycle uses higher water volumes in combination with affresh ® washer cleaner or liquid chlorine bleach to thoroughly clean the inside of the washer. This washer has a special cycle th...

More

Not Cleaning Clothing - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Wash_or_Clothing_Results/Not_Cleaning_Clothing_-_Washer
Make sure that the hot water inlet hose is connected to the hot water supply and that the cold water inlet hose is connected to the cold water supply. If you feel that the clothes are not coming clean...

More

Washer
https://producthelp.whirlpool.com/Connected_Appliances/Mobile_App_Features/Washer

Excessive Suds in a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Excessive_Suds_in_a_Front_Load_Washer
If you see "Sud" or "Sd" with the Rinse status light on, the washer is in the process of removing suds. If you see "Sud" or "Sd" and the Cycle Complete light is on, the washer detected too many suds d...

More

Washer Odor or Smell - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Odor_or_Smell/Washer_Odor_or_Smell_-_Washer
Have you performed the "Clean Washer" cycle, or has the "Clean Washer" light come on? The Clean Washer cycle uses higher water volumes in combination with affresh ® washer cleaner or liquid chlorine b...

More

Slower Spin Speeds on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Slower_Spin_Speeds_on_a_Front_Load_Washer
Your washer is designed so that in certain cycles, such as delicate or handwash cycles, the spin speeds are slower. In these cycles, more water is retained in the load at the end of the cycle to keep ...

More

START/PAUSE (Washer) - Stacked Laundry Center
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Washer_questions_or_concerns/Control_Panel_Operation_(on_some_models)/27_Inch_Models/START%2F%2FPAUSE_(Washer)_-_Stacked_Laundry_Center
Press the START/PAUSE button to start the washer. If you need to open the lid to add one or two missed garments: Press the START/PAUSE button. The lid will unlock once the washer movement has stopped....

More

Cycles, Options, and Modifiers on a Top Load HE Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Cycles%2C_Options%2C_and_Modifiers_on_a_Top_Load_HE_Washer
STEAM CLEAN The Steam Clean option adds additional soak and wash time to many cycles to help remove tough stains, as well as a steam boost for added cleaning power. As you touch the Soil Level pad, th...

More

HE Detergent use in a Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/HE_Detergent_use_in_a_Washer
If there is not enough detergent for the soil level in the load or the water hardness, then soils can redeposit onto the load. Use more detergent for washing heavy soils in cold or hard water, followi...

More

Leveling a Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Installation_Support/Leveling_a_Top_Load_Washer
If the washer is not level, water can splash off the top of the basket or the load. Make sure that all four front feet are installed, the washer is level front to back and side to side. Plastic Feet: ...

More

Electrical Supply Needed for a Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Installation_Support/Electrical_Supply_Needed_for_a_Washer
Check to see if a household circuit breaker or Ground Fault Circuit Interrupter (GFCI) outlet has tripped. If so, reset the circuit breaker or Ground Fault Circuit Interrupter. If the washer is on a f...

More

Using Single Dose Laundry Packets in a Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Using_Single_Dose_Laundry_Packets_in_a_Washer
If packets are placed in dispensers of either HE top-load or HE front-load, the dispensers may clog and cause an overflow Packets can get caught in the bellows in HE front-load if not put in the back ...

More

Cleaning Washers with affresh®
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Cleaning_and_Care/Cleaning_Washers_with_affresh%C2%AE
The affresh ® tablets are designed to dissolve slowly throughout the Clean Washer cycle to give a long thorough cleaning. If you washer does not have a "Clean Washer" cycle, use the highest water leve...

More

Error Codes in Front Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Error_Codes_in_Front_Load_Washers
When "Sud" or "Sd" is displayed, the washer automatically extends the rinse time to remove the excess suds. The household water supply is turned on and both the cold and the hot water faucets or valve...

More

Checking the Fill Hoses if the Washer is not Filling
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Installation_Support/Checking_the_Fill_Hoses_if_the_Washer_is_not_Filling
The water valve inside the machine needs to have the “pressure” from both attached hoses in order for the washer to complete the cycle. If you want to save energy by not connecting to the hot water li...

More

Front Load Washer Door Will Not Open
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Front_Load_Washer_Door_Will_Not_Open
If during installation the washer was plugged in and turned on without water hoses attached and turned on, the washer may attempt to drain for 8-10 minutes before the door unlocks. If the washer has a...

More

What is an F20 or FH Error Code on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/What_is_an_F20_or_FH_Error_Code_on_a_Front_Load_Washer

If a cold water wash is selected, the washer is designed to add hot water to keep the temperature optimal for cold wash performance (75°F +/-10°).If you want to save energy by not connecting to the ho...

More

Moving a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Installation_Support/Moving_a_Front_Load_Washer
Moving a Whirlpool Front Load Washer New shipping bolts must be reinstalled to avoid internal suspension and structural damage to your washer during transport. We recommend an Authorized Service Techn...

More

Front Load washer is not Draining, not Spinning, or Leaving Wet Loads
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Front_Load_washer_is_not_Draining%2C_not_Spinning%2C_or__Leaving_Wet_Loads
Common reasons for a Whirlpool Front Load washer not draining, not spinning, or leaving wet loads at the end of the cycle: In these cycles, more water is retained in the load at the end of the cycle t...

More

HE Detergent Use in the All-in-One Washer and Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Product_Info/Product_Assistance/HE_Detergent_Use_in_the_All-in-One_Washer_and_Dryer
If there is not enough detergent for the soil level in the load or the water hardness, then soils can redeposit onto the load. Using non-HE detergent can cause oversudsing, and cause longer cycle time...

More

Preventing Damaged Clothing in a Top Load HE Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Preventing_Damaged_Clothing_in_a_Top_Load_HE_Washer
This cycle starts with a soak to thoroughly saturate your large load, followed by medium wash action and medium spin speeds to maintain load balance. Always follow the instructions on the care label o...

More

Keeping a Front Load Washer Fresh
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Cleaning_and_Care/Keeping_a_Front_Load_Washer_Fresh
How to Keep your Whirlpool Front Load Washer Fresh The washer has a tight seal to avoid water leaks. To avoid odors, leave the door open to allow the washer to dry between uses. Leaving a load in the ...

More

Linting in Front Load Washer when Using the Wash & Dry Option
https://producthelp.whirlpool.com/?title=Laundry/Washers/Product_Info/Washer_Product_Assistance/Linting_in_Front_Load_Washer_when_Using_the_Wash_%26_Dry_Option
When using the “Wash & Dry” option, you may notice more lint on your clothing and/or inside of the washer, than a traditional wash only cycle. Since the washer is doing both the washing and the drying...

More

Humming or Whirling - Noise - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Noise/Humming_or_Whirling_-_Noise_-_Washer
You may hear an intermittent humming/whirling noise during the agitation/wash portion of the cycle as the motor turns the washer basket clockwise and counterclockwise. You may also hear a humming/whir...

More

VIDEO: HE Top Load Washer - Floating Washer Basket
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__HE_Top_Load_Washer_-_Floating_Washer_Basket
How your Whirlpool Floating Washer basket works

Preferences - Washer
https://producthelp.whirlpool.com/Connected_Appliances/Mobile_App_Features/Washer/Preferences_-_Washer
The "Preferences" section of the app allows you to set up which notifications that you would like to receive. When the washer’s Precision Dispense drawer is low on detergent, your phone will send you ...

More

Lint on Clothing - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Wash_or_Clothing_Results/Lint_on_Clothing_-_Washer
The air movement and tumbling of a dryer removes lint from the laundry load. Leave enough space in the washer to allow the laundry items to move freely. A tightly packed load of laundry is more likely...

More

Preferences - Washer
https://producthelp.whirlpool.com/Connected_Appliances/Mobile_App_Features/Washer/Preferences_-_Washer
The "Preferences" section of the app allows you to set up which notifications that you would like to receive. When the washer’s Precision Dispense drawer is low on detergent, your phone will send you ...

More

Long Cycles on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Long_Cycles_on_a_Front_Load_Washer
The time displayed during a cycle is an estimate of the time to complete the load. The excess suds can cause the washer to run at a reduced spin speed, which will result in very wet loads. The washer ...

More

Checking the Fill Hoses if your Washer is not Filling
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Product_Information/Stacked_Laundry_Center_Installation_Support/Checking_the_Fill_Hoses_if_your_Washer_is_not_Filling
The water valve inside the machine needs to have the “pressure” from both attached hoses in order for the washer to complete the cycle. If you want to save energy by not connecting to the hot water li...

More

Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Top_Load_Washer_not_Draining%2C_not_Spinning%2C_and%2F%2For_Leaving_Wet_Loads
Use the U-shaped drain hose form on the drain hose, and secure the drain hose. Is the end of the drain hose more than 96" (244 cm) above the floor? Your washer will not be able to adequately pump the ...

More

Damaged Clothing - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Wash_or_Clothing_Results/Damaged_Clothing_-_Washer
Mend rips and broken threads in seams before washing items to help avoid damage to clothing. Also check inside the washer for loose items that could snag fabrics and damage clothing. Were strings, sas...

More

Grinding or Rubbing - Noise - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Noise/Grinding_or_Rubbing_-_Noise_-_Washer
Typically, a grinding or rubbing noise will only occur in the agitation/wash or spin portions of the cycle. The noise this washer makes could become worse if the machine is unlevel. It is important to...

More

Washing Large Loads or Bulky Items in a Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Washing_Large_Loads_or_Bulky_Items_in_a_Washer
Washing Large Loads or Bulky Items in your Whirlpool Washer Always select the Bulky cycle when washing large items or heavy items. Oversized items, Water Resistant Materials or a large unevenly distri...

More

VIDEO: Washer Hose Noise
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Washer_Hose_Noise
Whirlpool Washer Hose Noise

Auto Sensing in a Top Load HE Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Auto_Sensing_in_a_Top_Load_HE_Washer
When the Start button is pressed, the washer will first perform a self-test on the lid lock. The washer will then move the load briefly, pause to allow water to soak into the load, and resume adding w...

More

Lid Not Latching - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Not_Operating/Not_Operating/Lid_Not_Latching_-_Top_Load_Washer
When the Start/Pause button is touched, the washer will first perform a self-test on the lid lock mechanism. You will hear a click, the basket will make a slight turn, and the lid will unlock briefly ...

More

Remote Control - Washer
https://producthelp.whirlpool.com/Connected_Appliances/Mobile_App_Features/Washer/Remote_Control_-_Washer
Remote Control Remote Control What it does: Remotely start and pause the washer using the Smart Appliances app. What it does for you: Lets you have freshly washed laundry when you’re home and ready fo...

More

VIDEO: How to Level a Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__How_to_Level_a_Washer
Leveling your Whirlpool Washer

Cleaning a Front Load Washer Door Seal
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Cleaning_and_Care/Cleaning_a_Front_Load_Washer_Door_Seal
Inspect the gray-colored seal between the door opening and the basket for soiled areas. Pull back the seal to inspect all areas under the seal and to check for small items. Use affresh ® tablets to ke...

More

Lid Lock is Not On - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Not_Starting_or_Not_Operating/Not_Starting_or_Operating/Lid_Lock_is_Not_On_-_Top_Load_Washer
If F8 E1 or LF (too long to fill) appears in the display, the washer is taking too long to fill or the washer is filling and draining. Any of these drain hose issues can cause the washer to siphon (fi...

More

Latching a Front Load Washer Door
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Latching_a_Front_Load_Washer_Door
Close the washer door by pushing it firmly until the latch clicks. Open and close the door firmly, the door must be completely closed and latched for the washer to operate. Be sure that clothing items...

More

Top Load HE Washer is Unbalanced or Overloaded
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Top_Load_HE_Washer_is_Unbalanced_or_Overloaded
Is Your Whirlpool Top Load Washer Unbalanced or Overloaded? A large unbalanced load could result in a reduced spin speed and wet clothes at the end of the cycle. If clothing gets out of balance, there...

More

Using the FanFresh Option on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Cleaning_and_Care/Using_the_FanFresh_Option_on_a_Front_Load_Washer
FanFresh® keeps your clothing fresh inside the washer after a cycle is complete until you have a chance to remove them, It does this by tumbling the drum occasionally to keep the clothing from settlin...

More

Using the Corner Dispensers in a Top Load HE washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Using_the_Corner_Dispensers_in_a_Top_Load_HE_washer
About two tablespoons of water could remain in the chlorine bleach or fabric softener dispenser at the end of the cycle. Liquid chlorine bleach automatically dispenses toward the end of the wash to en...

More

VIDEO: How to use an HE washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__How_to_use_an_HE_washer
Using your Whirlpool High Efficiency (HE) Washer

Rattling - Noise - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Noise/Rattling_-_Noise_-_Washer
The drain hose or water inlet hoses may be knocking against the rear of the washer cabinet. Secure the hoses using the beaded strap supplied with the washer (on some models), or use a wire tie. The vi...

More

Should Flood Safe Devices be Used on a Washer?
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Installation_Support/Should_Flood_Safe_Devices_be_Used_on_a_Washer%3F
Using Flood Safe Devices on a Whirlpool Washer Whirlpool recommends that appliances be direct connected to the water supply for optimum machine performance. Check with the manufacturer of the device t...

More

Changing the Language on Whirlpool Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Installation_Support/Changing_the_Language_on_Whirlpool_Washer
If your washer is displaying the incorrect language or you would like to change the language displayed on the console, complete the following steps: While on the language selection screen, press the "...

More

6. Utility Cycles - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Electronic_Control_above_Door/6._Utility_Cycles_-_Front_Load_Washer
Clean Washer - Use this every 30 washes to keep the inside of your washer fresh and clean. Use with affresh® Washer Cleaner tablets or liquid chlorine bleach to thoroughly clean the inside of your was...

More

Water Heard in Washer, but not Seen - Balance Ring Information
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Water_Heard_in_Washer%2C_but_not_Seen_-_Balance_Ring_Information
Water heard in the washer but not seen when the tub is moved is from the balance ring in the washer. The balance ring is a fluid filled ring at the top of the tub. The fluid in the balance ring shifts...

More

Lint on Clothing - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Wash_Performance_or_Clothing_Results/Lint_on_Clothing/Lint_on_Clothing_-_Front_Load_Washer
When you are using the “Wash & Dry” option, you may notice more lint on your clothing and/or inside of the washer than a traditional wash only cycle. Since the washer is doing both the washing and the...

More

Error Codes in Top Load HE Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Error_Codes_in_Top_Load_HE_Washers
This code will appear at the end of the wash cycle to indicate that the cold water hose is connected to the hot water inlet, and the hot water hose is connected to the cold water inlet. Check the wate...

More

Alexa All-in-One Washer-Dryer Commands
https://producthelp.whirlpool.com/Connected_Appliances/Product_Info/Connected_Support/Using_Alexa_with_Your_Appliances/Alexa_All-in-One_Washer-Dryer_Commands
Alexa Washer Commands What's the Command? Alexa, Tell Whirlpool to Start the Combo Alexa, Tell Whirlpool to Stop the Combo Alexa, Tell Whirlpool to Pause the Combo Alexa, Tell Whirlpool to Turn Quiet ...

More

VIDEO: Install Washer on Level Ground
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Install_Washer_on_Level_Ground
Install your Whirlpool Washer on Level Ground

Top Load Washer Basket has Vibration or Unbalanced Loads
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Top_Load_Washer_Basket_has_Vibration_or_Unbalanced_Loads
Whirlpool Top Load Washer Basket has Vibration or Unbalanced Loads Vibration in the washer basket: The washer basket will move while the washer is operating. It is normal for the washer basket to move...

More

Not Rinsing Well - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Wash_Performance_or_Clothing_Results/Not_Rinsing_Well/Not_Rinsing_Well_-_Front_Load_Washer
From the home screen, touch the Options icon (at the upper right of screen), and the Options screen will show Soil Level, Extra Rinse, Pre-Soak, FanFresh®, Steam Clean, and Wrinkle Shield™ selections....

More

VIDEO: Normal Top Load Washer Fill Sound
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_Normal_Top_Load_Washer_Fill_Sound
Normal Washer Fill Sound on my Whirlpool Top Load Washer

uL - Error Code - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Error_Codes/uL_-_Error_Code_-_Washer
Your washer is off balance or the load is unbalanced If the dial is flashing and the washer has stopped, redistribute the load, close the lid, and press START/PAUSE. You may also experience some vibra...

More

Clean Washer with affresh® - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/LED_Control_in_Door/Tools_Button/Utility_Cycles/Clean_Washer_with_affresh%C2%AE_-_Front_Load_Washer
This washer has a special cycle that uses higher water volumes in combination with affresh ® Washer Cleaner to thoroughly clean the inside of the washer. Add an affresh ® Washer Cleaner tablet to the ...

More

Clean Washer with affresh® - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/LED_Control_in_Door/Tools_Button/Utility_Cycles/Clean_Washer_with_affresh%C2%AE_-_Front_Load_Washer
This washer has a special cycle that uses higher water volumes in combination with affresh ® Washer Cleaner to thoroughly clean the inside of the washer. Add an affresh ® Washer Cleaner tablet to the ...

More

Properly Moving the Washer - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Maintenance/Properly_Moving_the_Washer_-_Top_Load_Washer
If the washer is moved during freezing weather, follow WINTER STORAGE CARE directions before proceeding. Disconnect drain from the drain system and drain any remaining water into a pan or bucket. Drap...

More

What is an F21 or F02 Error Code on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/What_is_an_F21_or_F02_Error_Code_on_a_Front_Load_Washer
What is an F21 or F02 Error Code on my Whirlpool Front Load Washer? Use the U-shaped drain hose form on the drain hose, and secure the drain hose. The excess suds will slow or stop the removal of wate...

More

VIDEO: How to Install Washer Drain Hose
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__How_to_Install_Washer_Drain_Hose
Installing a Whirlpool Washer Drain Hose

Clean Washer with affresh® - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Electronic_Control_in_Door/Tools_Button/Utility_Cycles/Clean_Washer_with_affresh%C2%AE_-_Front_Load_Washer
This washer has a special cycle that uses higher water volumes in combination with affresh ® Washer Cleaner to thoroughly clean the inside of the washer. Add an affresh ® Washer Cleaner tablet to the ...

More

Normal Washer Noises - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise_and_Vibration/Normal_Washer_Noises_-_Front_Load_Washer
Normal Sounds of your Whirlpool Front Load Washer Your washer may make sounds that are different from your old washer, especially if you had a top load washer prior to this. Click the links below to h...

More

Normal Washer Noises - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise/Normal_Washer_Noises_-_Front_Load_Washer
Normal Sounds of your Whirlpool Front Load Washer Your washer may make sounds that are different from your old washer, especially if you had a top load washer prior to this. Click the links below to h...

More

What is an F7 E1 Error Code on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/What_is_an_F7_E1_Error_Code_on_a_Front_Load_Washer
This code indicates a motor speed sensing error, the motor can not achieve the correct speed for the cycle selection. All four (4) shipping bolts and the plastic spacers must be removed from the rear ...

More

Unclogging a Front Load Washer Dispenser Drawer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Cleaning_and_Care/Unclogging_a_Front_Load_Washer_Dispenser_Drawer
Remove the dispenser, by pressing the release lever and rinse leftover detergent or additives that could clog the flow of water through the dispenser. Liquid or powdered color-safe bleach or oxi produ...

More

Using the Electronic Control on a Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Using_the_Electronic_Control_on_a_Top_Load_Washer
NOTE: The control panel features a sensitive surface that responds to a light touch of your finger. When using the touch control, touch on the name to operate, not the lights. The lights show which cy...

More

VIDEO: How to Install Washer Drain Hose
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Product_Information/Stacked_Laundry_Videos/VIDEO%3A__How_to_Install_Washer_Drain_Hose
Installing the Washer Drain Hose to your Whirlpool Stacked Laundry Center If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.

VIDEO: Loading a Top Load HE Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Loading_a_Top_Load_HE_Washer
Loading your Whirlpool Top Load HE Washer

lid - Error Code - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Error_Codes/lid_-_Error_Code_-_Washer
Possible Solutions Is the lid open? Did the washer drain out? If lid (Lid opened) appears in display, the washer lid was left open. Close the lid to clear the display. If the lid is left open for more...

More

LF - Error Code - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Error_Codes/LF_-_Error_Code_-_Washer
Any of these drain hose issues can cause the washer to siphon (fills and drains at the same time) and the washer never fills to the expected level. Either of these error codes may indicate there is so...

More

oL - Error Code - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Error_Codes/oL_-_Error_Code_-_Washer
Possible Solutions Is the Washer overloaded? If oL (overloaded) appears in display, the load too large. If an overload is detected, the washer will drain any water and detergent in the washer. Remove ...

More

Control Knobs on a Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Control_Knobs_on_a_Top_Load_Washer
Using the Control Knobs on a Whirlpool Top Load Washer Select the cycle most appropriate for the load being laundered. Select from the console the soil level for the clothes being laundered (#7 on pic...

More

dU - Error Code - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Error_Codes/dU_-_Error_Code_-_Washer
Possible Solutions Are there items on the lid? If dU (Lid cannot unlock) appears in display, the washer detects that there are objects on washer lid preventing it from unlocking. Remove objects, such ...

More

Unlocking a Front Load Washer Door When it is Locked at Install
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Installation_Support/Unlocking_a_Front_Load_Washer_Door_When_it_is_Locked_at_Install
If you have unboxed your front load washer to find that the door is locked and you are unable to open it, please review the following instructions. Please be sure the drain hose is installed in a drai...

More

No Power - No Operation - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Operation/No_Power_-_No_Operation_-_Washer
Is the washer connected correctly to the power source? Check to see if a household circuit breaker or Ground Fault Circuit Interrupter (GFCI) outlet has tripped. If so, reset the circuit breaker or Gr...

More

Precision Dispense Ultra in a Front Load washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Precision_Dispense_Ultra_in_a_Front_Load_washer
You can check to see the amount of HE detergent left in the cartridge by either visually looking at the cartridge or you can press the PRECISION DISPENSE button and view the status on the display. If ...

More

Washers
https://producthelp.whirlpool.com/Laundry/Washers

VIDEO: Sound of Front Load Washer Drain
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Sound_of_Front_Load_Washer_Drain
Normal Sounds of your Whirlpool Washer Draining

Clean Washer with affresh® - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Control_Panel_Operation/Tools_Button/Utility_Cycles/Clean_Washer_with_affresh%C2%AE_-_All-In-One_Washer_Dryer
This washer/dryer has a special cycle that uses higher water volumes in combination with affresh ® Washer Cleaner to thoroughly clean the inside of the washer/dryer. . After the cycle is complete, lea...

More

Clothing is Wrinkled - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Clothing_Results/Cleaning_Performance_or_Clothing_Results_Questions/Clothing_is_Wrinkled_-_Top_Load_Washer
Make sure the hot-water inlet hose is connected to the hot-water faucet and that the cold-water inlet hose is connected to the cold-water faucet. To reduce tangling and twisting, the load items need t...

More

SUD or Sd - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/SUD_or_Sd/SUD_or_Sd_-_Front_Load_Washer
The washer will not be able to spin out water with the excess suds. When "Sud" or "Sd" is displayed, the washer automatically extends the rinse time to remove the excess suds. The excess suds can caus...

More

Grinding Noise - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Noise/Grinding_Noise_-_Top_Load_Washer
It is important to follow the steps in the installation instructions for leveling the washer. It is important that the clothes have enough room to move around freely to allow the wash basket room to m...

More

Sd or 5d - Error Code - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Error_Codes/Sd_or_5d_-_Error_Code_-_Washer
Did you receive an Sd (may appear as 5d) or Sud Error Code? If Sd or Sud (excess suds) appears in display, you have excessive suds in washer. The washer is running a suds reduction routine. Allow the ...

More

Front Load Washer Dripping Water from the Door
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Front_Load_Washer_Dripping_Water_from_the_Door
The door seal is the rubber "gasket" inside the door. Remove and clean any dirt or deposits around the inner door seal with a damp cloth. The door glass seals against the rubber seal; dirt or deposits...

More

VIDEO: How the Lid Locks on a Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__How_the_Lid_Locks_on_a_Top_Load_Washer
Lid Locking on your Whirlpool Top Load Washer Refer to the video below for the sound the lid makes when it locks:

VIDEO: Changing the Language on a Whirlpool Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_Changing_the_Language_on_a_Whirlpool_Washer
Changing the Language on a Whirlpool Washer

VIDEO: Water in the Front Load Washer Dispenser
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Water_in_the_Front_Load_Washer_Dispenser
Water in the Dispenser on my Whirlpool Front Load Washer

VIDEO: Sound of Front Load Washer Spinning
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_Sound_of_Front_Load_Washer_Spinning
Normal Sounds of your Whirlpool Washer Ramping up to Spin, then High Speed Spin Ramp up to Spin: Top Spin Speed:

All-in-One Washer and Dryer taking a Long Time to Dry
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Product_Info/Product_Assistance/All-in-One_Washer_and_Dryer_taking_a_Long_Time_to_Dry
Because the Ventless dry system has nowhere to vent the moist air, your clothing may still feel slightly damp at the end of the cycle. If installed in a closet, the closet doors must have ventilation ...

More

What is an F8 E2 Error Code on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/What_is_an_F8_E2_Error_Code_on_a_Front_Load_Washer
F8 E2 Code in display on your Whirlpool Front Load Washer There is a problem with the Dispenser System: Press down on the release tab and pull straight out to remove the dispenser. Wash dispenser and ...

More

Alexa Washer Commands
https://producthelp.whirlpool.com/Connected_Appliances/Other_Info/Help_with_Alexa/Appliance_Commands/Alexa_Washer_Commands
Alexa Washer Commands Alexa Washer Commands What's the Command? Start Washer Alexa, Tell Whirlpool to Start the Washer Stop Washer Alexa, Tell Whirlpool to Stop the Washer Pause Washer Alexa, Tell Whi...

More

VIDEO: Sound of Front Load Washer Fill and Wash
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Sound_of_Front_Load_Washer_Fill_and_Wash
Normal Sounds of your Whirlpool Washer Filling and Washing

VIDEO: Tips to Keep a Washer Performing at its Best
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Tips_to_Keep_a_Washer_Performing_at_its_Best
Tips to Keep your Whirlpool Washer Performing at its Best

Won't Start - Has Power - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Operation/Won't_Start_-_Has_Power_-_Washer
If the control lock feature is activated the control lock light will be on. CLICK HERE for more information on the lid locking You may need to press and hold the start button for up to 3 seconds to en...

More

Preventing Excessive Lint from Clothing
https://producthelp.whirlpool.com/Laundry/Stacked_Laundry_Center/Product_Information/Stacked_Laundry_Center_Tips_and_Tricks/Preventing_Excessive_Lint_from_Clothing
There are several causes for lint on clothing; following are tips for reducing the amount of lint in your clothes: Washing new clothing inside out will help reduce the amount of lint in the cycle. Alw...

More

VIDEO: Normal Basket Movement On Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Normal_Basket_Movement_On_Top_Load_Washer
Basket Movement On your Whirlpool Top Load Washer

Sd or SUD - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/Sd_or_SUD_-_Front_Load_Washer
If you see "Sud" or "Sd" with the Rinse status light on, the washer is in the process of removing suds. If you see "Sud" or "Sd" and the Complete Cycle light is on, the washer detected too many suds d...

More

VIDEO: Using Precision Dispense on a Whirlpool Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Using_Precision_Dispense_on_a_Whirlpool_Washer
Using the Precision Dispense System on a Whirlpool Washer

VIDEO: Using Delay Wash on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Using_Delay_Wash_on_a_Front_Load_Washer
Using Delay Wash on your Whirlpool Front Load Washer

VIDEO: Using Delay Wash on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/VIDEO%3A__Using_Delay_Wash_on_a_Front_Load_Washer
Using Delay Wash on your Whirlpool Front Load Washer

VIDEO: Using the Drawer Dispenser on a Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_Using_the_Drawer_Dispenser_on_a_Top_Load_Washer
How to Use the Drawer Dispenser on your Whirlpool Top Load Washer

VIDEO: Front Load Washer with Wash & Dry Option
https://producthelp.whirlpool.com/?title=Laundry/Washers/Product_Info/Washer_Videos/VIDEO:_Front_Load_Washer_with_Wash_%26_Dry_Option
The Wash & Dry Option in your Whirlpool Front Load Washer

VIDEO: How to Install Whirlpool Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_How_to_Install_Whirlpool_Top_Load_Washer
How to Install Whirlpool Top Load Washer

Service and Support - Washer
https://producthelp.whirlpool.com/Connected_Appliances/Mobile_App_Features/Washer/Service_and_Support_-_Washer
Service and Support Service and Support What it does: If you have a question about your washer or if you need service, the "Service and Support" section of the app provides our Customer Support phone ...

More

Ld - Error Code - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Error_Codes/Ld_-_Error_Code_-_Washer
If Ld (drain pump system problem - long drain) appears in display, the washer is taking too long to drain water. Lower drain hose if the end is higher than 96" (2.4 m) above the floor. See Installatio...

More

Washer is Leaving Clothes Discolored or with Dye Transfer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Washer_is_Leaving_Clothes_Discolored_or_with_Dye_Transfer
Whirlpool Washer is Leaving Clothes Discolored or with Dye Transfer Dye transfer can occur when mixing colors in a load. Use the following tips to help prevent dye transfer: Mixing different colors ma...

More

Knocking or Thumping - Noise - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Noise/Knocking_or_Thumping_-_Noise_-_Washer
Typically, a knocking or thumping noise will only occur during agitation/wash, and spin portions of the cycle. There will be a knocking/thumping noise as the drive system shifts from agitation mode to...

More

VIDEO: How to Install Whirlpool Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_How_to_Install_Whirlpool_Front_Load_Washer
How to Install Whirlpool Front Load Washer

Humming or Whirling Noise - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Noise/Humming_or_Whirling_Noise_-_Top_Load_Washer
You may hear an intermittent humming/whirling noise during the agitation/wash portion of the cycle as the motor turns the washer basket clockwise and counterclockwise. You may also hear a humming/whir...

More

Clicking or Clacking - Noise - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Noise/Clicking_or_Clacking_-_Noise_-_Washer
Possible Solutions Washer makes a clicking or clacking type noise Typically, a clicking or clacking noise will only occur at the start of a cycle. Most likely it is the sound of the lid locking. CLICK...

More

Not Cleaning Clothing - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Wash_Performance_or_Clothing_Results/Not_Cleaning_Clothing/Not_Cleaning_Clothing_-_Front_Load_Washer
Are you using the correct cycle selection and temperature for the fabric being washed? Always follow the instructions on the care label of the garment before washing in your machine. CLICK HERE for mo...

More

Normal, Delicate, Eco or Quick Wash Cycles - Water Level - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Water_Level/Normal%2C_Delicate%2C_Eco_or_Quick_Wash_Cycles_-_Water_Level_-_Washer
Delicate or Hand Wash cycle will result in a deeper fill wash, - the washer will fill about 1/2 full. Whites, Heavy Duty, Deep Water Wash, Power Wash, and Super Wash will also fill to about 1/2 full. ...

More

Gurgling or Slurping - Noise - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Noise/Gurgling_or_Slurping_-_Noise_-_Washer
Possible Solutions Gurgling or Slurping Noises: Typically, a gurgling or slurping noise will only occur during the drain portion of the cycle. During draining, the washer pump will continuously run to...

More

VIDEO: How to Install Whirlpool Washer Pedestal
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_How_to_Install_Whirlpool_Washer_Pedestal
How to Install Whirlpool Washer Pedestal

Excessive Detergent or Suds - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Clothing_Results/Cleaning_Performance_or_Clothing_Results_Questions/Excessive_Detergent_or_Suds_-_Top_Load_Washer
Using non-HE detergent or more than the manufacturer's recommended amount of detergent can cause excessive suds. The excess suds can cause the washer to run at a reduced spin speed, resulting in very ...

More

Vibration During Cycle - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Vibration/Vibration_During_Cycle_-_Top_Load_Washer
Always check the care label to make sure that the item is machine washable in a top load washer (some bulky items state to only wash in a front load commercial-style washer). If a drain pan is used un...

More

Grinding or Rubbing Noise - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Noise/Grinding_or_Rubbing_Noise_-_Top_Load_Washer
Typically, a grinding or rubbing noise will only occur in the agitation/wash or spin portions of the cycle. It is important to follow the steps in the installation instructions for leveling the washer...

More

Moving a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Wash_Performance_or_Clothing_Results/Cleaning_and_Maintenance/Moving_a_Front_Load_Washer
If washer will be moved during freezing weather, follow WINTER STORAGE CARE directions before moving. Disconnect drain hose from drain system and from back of washer. your washer, it must be properly ...

More

VIDEO: Sound of Front Load Washer Door Lock and Unlock
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_Sound_of_Front_Load_Washer_Door_Lock_and_Unlock
Clicking Sound on Whirlpool Front Load Washer - Door Lock Sound and Door Unlock Sound NOTE: Door Unlock includes End of Cycle Signal

Sud - Error Code - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/Sud/Sud_-_Error_Code_-_Top_Load_Washer
Possible Solutions Did you receive a Sud error code? If Sud (excess suds) appears in display, you have excessive suds in washer. Be sure to always use HE High Efficiency Detergent in the washer. CLICK...

More

Clothes are Tangled - All in One Washer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Washer_Cycle_Questions_or_Concerns/Wash_Performance/Clothes_are_Tangled_-_All_in_One_Washer
Were you washing just one type of garment in the load? Did you load the washer as recommended in the Owner's Manual? Place a load of sorted clothes loosely in the washer. To reduce tangling and twisti...

More

VIDEO: Setting Detergent Concentration in a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A__Setting_Detergent_Concentration_in_a_Front_Load_Washer
Setting Detergent Concentration in your Whirlpool Washer

VIDEO: Sound of Front Load Washer Door Lock and Unlock
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_Sound_of_Front_Load_Washer_Door_Lock_and_Unlock
Clicking Sound on Whirlpool Front Load Washer - Door Lock Sound and Door Unlock Sound NOTE: Door Unlock includes End of Cycle Signal

Clothes are Tangled - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Wash_Performance_or_Clothing_Results/Clothing_Wrinkled_or_Tangled/Clothes_are_Tangled_-_Front_Load_Washer
Were you washing just one type of garment in the load? Loads tend to tangle or twist when washing loads of one type of garment, such as long-sleeve shirts. Place a load of sorted clothes loosely in th...

More

Utility Cycles - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Electronic_Control_in_Door/Tools_Button/Utility_Cycles/Utility_Cycles_-_Front_Load_Washer
Press this icon to access the following utility cycles: Touch the utility cycle you wish to use and follow the screen prompts. NOTE: To get a Rinse & Spin cycle, select Drain & Spin and the Extra Rins...

More

What does the "SUD" or "SD" Error Code mean
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/What_does_the_%22SUD%22_or_%22SD%22_Error_Code_mean
When "Sud" or "Sd" is displayed, the washer automatically extends the rinse time to remove the excess suds. If the problem continues, and the correct amount and correct type of detergent is being used...

More

Water Remains in Tub or Inside Washer - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Cycle_Concerns/Water_Remains_After_Cycle_is_Complete/Water_Remains_in_Tub_or_Inside_Washer_-_Front_Load_Washer
If that is the case, some water may remain inside the tub, and you may see Error Codes. If there is any Error Code showing, pause the washer, and try to re-balance the load. If the cycle appears to be...

More

How to Clean a Front Load Washer Dispenser (Drawer)
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Cleaning_and_Care/How_to_Clean_a_Front_Load_Washer_Dispenser_(Drawer)
How to Clean a Whirlpool Washer Dispenser (Drawer) Unlock the dispenser drawer by pressing the Dispenser Release Lever. The inserts are the detergent selector and covers of the softener and bleach dis...

More

Low Water Level - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Washer_Cycle_Questions_or_Concerns/Wash_Performance/Low_Water_Level_-_All-In-One_Washer_Dryer
Does the water level seem too low? The water level on this washer should seem low because this is a low water usage washer. The water level will not be as visible as it was in your standard, deep fill...

More

Water Level Questions - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Water_Level/Water_Level_Questions_-_Top_Load_Washer
If you would like the machine to automatically sense the appropriate water level for the load size and type, turn the Water Level knob to the Auto Sensing setting. If you would like to add the maximum...

More

Not Cleaning Clothing - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Washer_Cycle_Questions_or_Concerns/Wash_Performance/Not_Cleaning_Clothing_-_All-In-One_Washer_Dryer
NOTE: Concentration Level does not mean the Dispenser will dispense that many doses of HE detergent; it means that the detergent you have purchased is that concentrated, and the dosage will actually b...

More

Cycle Status Lights - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Knob_or_Knob_and_Electronic_Control/2019_or_After/Cycle_Status_Lights_-_Front_Load_Washer
Once the door has locked, the washer will begin spinning to sense the load size. After the load size is sensed, the estimated time based on load size will be displayed, and water will be added. The ac...

More

Clothes are Wrinkled - All in One Washer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Washer_Cycle_Questions_or_Concerns/Wash_Performance/Clothes_are_Wrinkled_-_All_in_One_Washer
To reduce tangling and twisting, the load items need to tumble freely in the washer. Long wash times may provide too much wash action for the size and type of load you are washing. Try selecting a low...

More

Selecting the Correct Cycle for the Clothes being Washed
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Selecting_the_Correct_Cycle_for_the_Clothes_being_Washed
Selecting the Correct Cycle for the Clothes in your Whirlpool Washer Are you using the correct cycle selection for fabric type? Use hot or warm washes if the warmer temperatures are safe for the fabri...

More

Fd - Error Code - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Error_Codes/Fd_-_Error_Code_-_Washer
Possible Solutions Fd means Factory Default settings. A Fd (Factory Default) error code indicates that the washer was set back to factory default settings. To return all options and modifiers to Facto...

More

Lint on Clothing - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Clothing_Results/Cleaning_Performance_or_Clothing_Results_Questions/Lint_on_Clothing_-_Top_Load_Washer
The air movement and tumbling of a dryer removes lint from the laundry load. Leave enough space in the washer to allow the laundry items to tumble freely. A tightly packed load of laundry is more like...

More

Damaged Clothing - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Clothing_Results/Cleaning_Performance_or_Clothing_Results_Questions/Damaged_Clothing_-_Top_Load_Washer
Were you washing bedding, sheets, or bulky items on a Cycle other than Bulky or Sheets? This washer is designed to use the Bulky or Sheets/Bedding cycle for bulky clothing items or bedding. When washi...

More

VIDEO: Humming or Whirling Noise during Drain
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_Humming_or_Whirling_Noise_during_Drain
The Humming/Whirling noises you would hear during the agitation/wash or spin portions of the cycle are caused by the motor. You may hear an intermittent humming/whirling noise during the agitation/was...

More

F8 E1 or LF or LO FL Error Code in Display
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/F8_E1_or_LF_or_LO_FL_Error_Code_in_Display
If the washer has an F8 E1, LF, or LO FL error, the door will be locked, and the control will be unresponsive. Press the power button, and the washer will start a drain routine which takes approximate...

More

F22 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/F22/F22_-_Front_Load_Washer
Is the washer door firmly shut? The door must be completely closed for the washer to operate. The door may look closed, but may not be latched. Verify there is no wash media (detergent, fabric softene...

More

FH - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/FH/FH_-_Front_Load_Washer
FH Error Code FH indicates that there is a Water Inlet Problem—no or insufficient water supply. Select PAUSE/CANCEL twice to cancel the cycle. Unplug washer or disconnect power. Check the following: A...

More

Vibration - Washing Multiple Items - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Vibration/Vibration_-_Washing_Mulitple_Items_-_Top_Load_Washer
If the load is not evenly distributed in the basket when spinning begins, the load will create movement in the basket, which will result in noise and vibration. Always check the care label to make sur...

More

F20 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/F20/F20_-_Front_Load_Washer
F20 Error Code F20 indicates a water inlet problem—no water or insufficient water supply. Try the following method to resolve: Select PAUSE/CANCEL twice to cancel the cycle. Unplug washer or disconnec...

More

rL or F34 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/rL_or_F34/rL_or_F34_-_Front_Load_Washer
rL or F-34 Code in display: This error code indicates that items were detected in the washer during the Clean Washer cycle. Have all items been removed before starting the Clean Washer cycle? Remove i...

More

Not Rinsing Well - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Washer_Cycle_Questions_or_Concerns/Wash_Performance/Not_Rinsing_Well_-_All-In-One_Washer_Dryer
CLICK HERE for more information on the use of HE Detergent If you used too much detergent, or you are laundering a load that you feel may need to have more rinsing, set the control to add extra rinses...

More

Int - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/Int/Int_-_Front_Load_Washer
This error code indicates that the cycle was paused or cancelled. Has the cycle been Paused or Cancelled? The washer can take 20 to 30 minutes to stop spinning and drain, and will display this error c...

More

Not Draining - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cycle_Concerns/Not_Draining_-_Top_Load_Washer
Verify that the drain hose is not too far down into the standpipe beyond the elbow which could cause siphoning, water to drain back into the tub or slow or no spin. Using the U-shape drain hose form (...

More

Clunk or Clunking - Noise - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Noise/Clunk_or_Clunking_-_Noise_-_Washer
Possible Solutions Clunk or Clunking Noises: There will be a clunk noise as the drive system shifts from agitation mode to spin mode or vise versa. These sounds are part of the normal washer operation...

More

Not Turning, Tumbling, or Spinning - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Not_Starting_or_Not_Operating/Not_Turning%2C_Tumbling%2C_or_Spinning/Not_Turning%2C_Tumbling%2C_or_Spinning_-_Front_Load_Washer
If Low Spin or No Spin was selected, the washer might not remove enough water from the load. The load may need to be rearranged to allow even distribution of the weight in the basket. In these cycles,...

More

Not Rinsing Well - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Wash_Performance/Not_Rinsing_Well/Not_Rinsing_Well_-_Compact_Front_Load_Washer
CLICK HERE for more information on the use of HE Detergent Leave enough space in the washer to allow the load to tumble freely. Clothing that is tightly packed in the washer may trap the detergent and...

More

VIDEO: F0 E3 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F0_E3_Error_Code_for_Top_Load_Washer
F0 E3 Error Code for Top Load Washers

VIDEO: F2 E4 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F2_E4_Error_Code_for_Top_Load_Washer
F2 E4 Error Code for Whirlpool Top Load Washers

VIDEO: F1 E1 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F1_E1_Error_Code_for_Top_Load_Washer
F1 E1 Error Code for Whirlpool Top Load Washers

Cleaning the Drain Pump Filter/Draining Residual Water on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Cleaning_and_Care/Cleaning_the_Drain_Pump_Filter%2F%2FDraining_Residual_Water_on_a_Front_Load_Washer
Open the dispenser drawer by pulling on the handle at the base of the washer. Place a broad, flat container beneath the drain pump filter to collect the drain water. Release the black hose from the ho...

More

Clothes are Tangled - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Wash_Performance/Clothing_Wrinkled_or_Tangled/Clothes_are_Tangled_-_Compact_Front_Load_Washer
Were you washing just one type of garment in the load? Did you load the washer as recommended in the Owner's Manual? Place a load of sorted clothes loosely in the washer. To reduce tangling and twisti...

More

VIDEO: F6 E2 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F6_E2_Error_Code_for_Top_Load_Washer
F6 E2 Error Code for Whirlpool Top Load Washers

VIDEO: F6 E3 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F6_E3_Error_Code_for_Top_Load_Washer
F6 E3 Error Code for Whirlpool Top Load Washers

VIDEO: F0 E3 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F0_E3_Error_Code_for_Top_Load_Washer
F0 E3 Error Code for Top Load Washers

VIDEO: F2 E4 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F2_E4_Error_Code_for_Top_Load_Washer
F2 E4 Error Code for Whirlpool Top Load Washers

VIDEO: F1 E1 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F1_E1_Error_Code_for_Top_Load_Washer
F1 E1 Error Code for Whirlpool Top Load Washers

F7 E1 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/F7_E1/F7_E1_-_Front_Load_Washer
This code indicates a motor speed sensing error, the motor can not achieve the correct speed for the cycle selection. All four (4) shipping bolts and the plastic spacers must be removed from the rear ...

More

Cleaning the Drain Pump Filter/Draining Residual Water on a Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Cleaning_and_Care/Cleaning_the_Drain_Pump_Filter%2F%2FDraining_Residual_Water_on_a_Front_Load_Washer
Open the dispenser drawer by pulling on the handle at the base of the washer. Place a broad, flat container beneath the drain pump filter to collect the drain water. Release the black hose from the ho...

More

Suds When using "No Splash" or "Easy Pour" Liquid Chlorine Bleach
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Suds_When_using_%22No_Splash%22_or_%22Easy_Pour%22_Liquid_Chlorine_Bleach
Did you use "no splash" or "easy pour" liquid chlorine bleach? This type of liquid chlorine bleach contains a thickening agent that may create excess suds in washers. If this is the case, run the wash...

More

Clothes are Wrinkled - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Wash_Performance_or_Clothing_Results/Clothing_Wrinkled_or_Tangled/Clothes_are_Wrinkled_-_Front_Load_Washer
Make sure the hot-water inlet hose is connected to the hot-water valve and that the cold-water inlet hose is connected to the cold-water faucet. To reduce tangling and twisting, the load items need to...

More

VIDEO: F2 E5 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F2_E5_Error_Code_for_Top_Load_Washer
F2 E5 Error Code for Whirlpool Top Load Washers

VIDEO: F5 E3 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F5_E3_Error_Code_for_Top_Load_Washer
F5 E3 Error Code for Whirlpool Top Load Washers

VIDEO: F5 E2 Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F5_E2_Error_Code_for_Top_Load_Washer
F5 E2 Error Code for Whirlpool Top Load Washers

Thumping Noise - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise/Thumping_Noise_-_Front_Load_Washer
It is necessary to remove all shipping materials for proper operation and to avoid excessive noise from washer. Front and rear feet must be in firm contact with floor, and washer must be level to oper...

More

Not Spinning - Top Load HE Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Cycle/Not_Spinning_or_Wet_Clothes/Not_Spinning_-_Top_Load_HE_Washer
If not, the load may become unbalanced, causing the washer to not spin properly. If Low Spin or No Spin was selected, the washer may not remove enough water from the load. Use the U-shaped drain hose ...

More

Chirping Noise - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise/Chirping_Noise_-_Front_Load_Washer
When the washer is not on a pedestal, all four washer feet need to be in firm contact with the floor. Try to rock the washer diagonally, from corner to corner, with your hands; adjust the feet if the ...

More

Options - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Knob_or_Knob_and_Electronic_Control/2019_or_After/Options_-_Front_Load_Washer
Fresh Hold®/Fresh Spin™ - The Fresh Hold®/Fresh Spin™ option will periodically tumble the load after the end of the cycle for up to 24 hours while the integrated fan circulates air through the washer ...

More

Chirping Noise - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise_and_Vibration/Chirping_Noise_-_Front_Load_Washer
When the washer is on a pedestal, the feet must be removed from the appliance before installing it onto the pedestal. The black pedestal pads should be securely placed between the top of the pedestal ...

More

Not Turning, Tumbling, or Spinning - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Washer_Cycle_Questions_or_Concerns/Not_Turning%2C_Tumbling%2C_or_Spinning/Not_Turning%2C_Tumbling%2C_or_Spinning_-_All-In-One_Washer_Dryer
In these cycles, more water is retained in the load at the end of the cycle to keep delicate fabrics from shrinking and wrinkling. The excess suds can cause the washer to run at a reduced spin speed, ...

More

Thumping Noise - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise_and_Vibration/Thumping_Noise_-_Front_Load_Washer
If the noise only occurs briefly at slow/low spin speeds, this may be caused by the bellows and its part of normal operation. It is necessary to remove all shipping materials for proper operation and ...

More

Controls are Not Working - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Not_Starting_or_Not_Operating/Not_Starting_or_Operating/Controls_are_Not_Working_-_Top_Load_Washer
When using the touch control, touch on the name to operate, not the lights. If the Control Lock feature is activated the Control Lock light will be on. CLICK HERE for more information on the Control p...

More

Cleaning the Interior - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Wash_Performance_or_Clothing_Results/Cleaning_and_Maintenance/Cleaning_the_Interior_-_Front_Load_Washer
Have you performed the "Clean Washer" cycle, or has the "Clean Washer" light come on? The Clean Washer cycle uses higher water volumes in combination with affresh ® ​ washer cleaner, liquid chlorine b...

More

F5 E4 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/F5_E4/F5_E4_-_Front_Load_Washer
If the washer shows an F5 E4 Error Code, this may be an indication that the machine may have been run for 3 consecutive cycles without opening the door in between cycles. This may occasionally happen ...

More

Washer Keeps Draining - Top Load
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Cycle_Concerns/Washer_Keeps_Draining/Washer_Keeps_Draining_-_Top_Load
When the washer goes into a drain routine, it will sound like it's draining for approximately 8 to 10 minutes, during which time the pump will run continuously. Check the household water supply to see...

More

Not Turning, Tumbling or Spinning - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Cycle/Not_Turning%2C_Tumbling_or_Spinning/Not_Turning%2C_Tumbling_or_Spinning_-_Compact_Front_Load_Washer
In these cycles, more water is retained in the load at the end of the cycle to keep delicate fabrics from shrinking and wrinkling. If not, the load may become unbalanced, causing the washer to not spi...

More

Banging Noise - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise_and_Vibration/Banging_Noise_-_Front_Load_Washer
The drain hose or water inlet hoses may be knocking against the rear of the washer cabinet. Secure the hoses using the beaded strap supplied with the washer (on some models), or use a wire tie. The vi...

More

F21 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/F21/F21_-_Front_Load_Washer
Possible Solutions F21 Error Code F21 indicates a drain problem. Try the following method to resolve: Select PAUSE/CANCEL twice to cancel the cycle. Unplug washer or disconnect power. Check the follow...

More

Cleaning the Interior - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Maintenance/Cleaning_the_Interior_-_Top_Load_Washer
CLICK HERE for more information on the importance of using HE detergent Have you performed the "Clean Washer" cycle, or has the "Clean Washer" light come on? Run the Clean Washer cycle every month to ...

More

Power - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Knob_or_Knob_and_Electronic_Control/2019_or_After/Power_-_Front_Load_Washer
Power Button Power - Touch to turn the washer on and off. Touch to stop/cancel a cycle at any time. NOTE: Turning the Wash Cycle knob will also turn the washer on.

Not Operating or Won't Start - Has Power - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Not_Operating/Not_Operating_or_Won't_Start_-_Has_Power_-_Top_Load_Washer
If F8 E1 or LF (too long to fill) appears in the display, the washer is taking too long to fill or the washer is filling and draining. Any of these drain hose issues can cause the washer to siphon (fi...

More

Not Filling or Long Fill - Top Load HE Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Cycle/Not_Filling_or_Long_Fill/Not_Filling_or_Long_Fill_-_Top_Load_HE_Washer
Check the household faucets to see if the hot and cold water household water supply lines are turned on. Use the U-shaped drain hose form on the drain hose and securely attach to drainpipe (standpipe)...

More

Preventing Detergent from Re-depositing on Clothing
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Tips_and_Tricks/Preventing_Detergent_from_Re-depositing_on_Clothing
Top Load HE washers are designed to use only HE High Efficiency Detergent. Run hot water in the sink nearest the washer before starting to ensure hot water in the water lines. Leave enough space in th...

More

Rattling Noise - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Noise/Rattling_Noise_-_Top_Load_Washer
The drain hose or water inlet hoses may be knocking against the rear of the washer cabinet. Secure the hoses using the beaded strap supplied with the washer (on some models), or use a wire tie. The vi...

More

VIDEO: F8 E1 or LF Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F8_E1_or_LF_Error_Code_for_Top_Load_Washer
F8 E1 or LF Error Code for Whirlpool Top Load Washers

Rattling Noise - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Noise/Rattling_Noise_-_Top_Load_Washer
The drain hose or water inlet hoses may be knocking against the rear of the washer cabinet. Secure the hoses using the beaded strap supplied with the washer (on some models), or use a wire tie. The vi...

More

Lint on Clothing - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Washer_Cycle_Questions_or_Concerns/Wash_Performance/Lint_on_Clothing_-_All-In-One_Washer_Dryer
See “Cleaning the Drain Pump Filter" in the "Cleaning and Maintenance" symptom above. If you choose not to use the Dry portion of your All-in-One Washer and Dryer, you can expect some lint on your lau...

More

VIDEO: F9 E1 or DRN Error Code for Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F9_E1_or_DRN_Error_Code_for_Top_Load_Washer
F9 E1 or DRN Error Code for Whirlpool Top Load Washers

Clothes are Wrinkled - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Wash_Performance/Clothing_Wrinkled_or_Tangled/Clothes_are_Wrinkled_-_Compact_Front_Load_Washer
Long wash times may provide too much wash action for the size and type of load you are washing. Try selecting a lower spin speed or a cycle, such as Casual, Active Wear, or Delicate, with reduced spin...

More

Not Filling or Takes too Long to Fill - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cycle_Concerns/Not_Filling_or_Takes_too_Long_to_Fill_-_Top_Load_Washer
If you would like the machine to automatically sense the appropriate water level for the load size and type, turn the Water Level knob to the Auto Sensing setting. If you would like to add the maximum...

More

F5 E3 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/F5_E3/F5_E3_-_Front_Load_Washer
This error code indicates that the door is not locking properly. The door must be completely closed for the washer to operate. The door may look as if it's closed, but it may not be latched. Is there ...

More

Not Operating or Won't Start - Has Power - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Not_Operating/Not_Operating/Not_Operating_or_Won't_Start_-_Has_Power_-_Top_Load_Washer
If F8 E1 or LF (too long to fill) appears in the display, the washer is taking too long to fill, or the washer is filling and draining. Any of these drain hose issues can cause the washer to siphon (f...

More

Cycle Time is Not Advancing - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Cycle_Concerns/Cycle_Time_is_Not_Advancing/Cycle_Time_is_Not_Advancing_-_Front_Load_Washer
If the time holds constant towards the end of the cycle, this indicates the load is having a difficult time balancing, and extra time is required to balance the load for the final spin. If the wash cy...

More

F7 EC - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F7_EC_-_Front_Load_Washer
F7 EC Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Monitor the washer for one (1) minute to ensure the error code does not display again. If error co...

More

F0 E1 or rL - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F0_E1_or_rL_-_Front_Load_Washer
Possible Solutions F0 E1 or rL Error Code The "Clean Washer" cycle has been started, but the machine is detecting a load inside the washer. Remove any items inside the washer, then restart for your "C...

More

CL Code - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/CL_Code_-_Front_Load_Washer
Possible Solution Does the washer need to be cleaned? The CL code is a reminder to run the Clean Washer cycle and will appear after 30 cycles. The code will automatically clear once a Clean Washer cyc...

More

CL Code - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/CL_Code_-_Front_Load_Washer
Possible Solution Does the washer need to be cleaned? The CL code is a reminder to run the Clean Washer cycle and will appear after 30 cycles. The code will automatically clear once a Clean Washer cyc...

More

ob - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/ob_-_Front_Load_Washer
You may notice the cycle time was longer than initially displayed, or the clothing is still dripping wet, this is because a sizeable unbalanced load could result in reduced spin speeds. Remove a few o...

More

Vibration - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Vibration_and_Sounds/Vibration_-_All-In-One_Washer_Dryer
Front and rear feet must be in firm contact with floor, and washer/dryer must be level to operate properly. If Washer/Dryer rocks back and forth, the legs will need to be adjusted so unit is level. Yo...

More

F5 E2 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/F5_E2/F5_E2_-_Front_Load_Washer
This error code indicates that the door is not locking properly. The door must be completely closed for the washer to operate. The door may look as if it's closed, but it may not be latched. Is there ...

More

Error "Beeps" - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/Error_%22Beeps%22/Error_%22Beeps%22_-_Front_Load_Washer
Error "Beeps" are an audible signal that the machine makes to alert the user that something is not right. Typically this will happen if the washer door has not been opened and closed for at least 3 cy...

More

F8 E3 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F8_E3_-_Front_Load_Washer
F8 E3 Error Code Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Monitor the washer for one (1) minute to ensure the error code does not display again. If error co...

More

F0 E2 or Sd - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F0_E2_or_Sd_-_Front_Load_Washer
The F0 E2 or Sd error code means your washer has detected an excessive amount of suds in the washer basket. If you see "Sud" or "Sd" with the Rinse status light on, the washer is in the process of rem...

More

How to Move - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Cleaning_and_Maintenance/How_to_Move_-_Compact_Front_Load_Washer
Disconnect drain hose from drain system and from back of washer. Place inlet hose and drain hose inside washer drum. Bundle power cord with a rubber band or cable tie to keep it from hanging onto the ...

More

Not Draining - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Cycle_Concerns/Not_Draining/Not_Draining_-_Front_Load_Washer
Using the U-shape drain hose form (as described in the Installation Instructions), will provide the correct length of drain hose in the drainpipe or laundry tub. Check that the top of the drain is at ...

More

Lint on Clothing - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Wash_Performance/Lint_on_Clothing/Lint_on_Clothing_-_Compact_Front_Load_Washer
Did you line dry the load of laundry? The air movement and tumbling of a dryer removes lint from the laundry load. Leave enough space in the washer to allow the laundry items to tumble freely. A tight...

More

LF - Error Code - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/LF/LF_-_Error_Code_-_Top_Load_Washer
Any of these drain hose issues can cause the washer to siphon (fills and drains at the same time) and the washer never fills to the expected level. Either the F8E1 or the LF error codes may indicate t...

More

Winter Storage Care - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Maintenance/Winter_Storage_Care_-_Top_Load_Washer
To avoid damage, install and store washer where it will not freeze. Put 1 qt. (1 L) of R.V.-type antifreeze in basket and run washer on RINSE & SPIN cycle for about 30 seconds to mix antifreeze and re...

More

F9 E1 - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/F9_E1_-_Front_Load_Washer
Using the U-shape drain hose form (as described in the Installation Instructions), will provide the correct length of drain hose in the drainpipe or laundry tub. Care Experts please note that the Inst...

More

5. Cycle Modifiers - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Electronic_Control_above_Door/5.__Cycle_Modifiers_-_Front_Load_Washer
Once a wash setting is selected, it is saved for the cycle selected. To return to factory default cycle settings, unplug the washer for 30 seconds; then plug back in. Temp - The recommended wash tempe...

More

Not Draining - Top Load HE Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Cycle/Not_Draining/Not_Draining_-_Top_Load_HE_Washer
Verify that the drain hose is not too far down into the standpipe beyond the elbow which could cause siphoning, water to drain back into the tub or slow or no spin. Using the U-shape drain hose form (...

More

LF - Error Code - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/LF/LF_-_Error_Code_-_Top_Load_Washer
Any of these drain hose issues can cause the washer to siphon (fills and drains at the same time) and the washer never fills to the expected level. Either the F8E1 or the LF error codes may indicate t...

More

Sounds: Beeping or Audio Noises on Front Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Sounds%3A_Beeping_or_Audio_Noises_on_Front_Load_Washers
Select models have a cycle signal option to turn off the end of cycle signal or tones that sound when a setting is touched. Use this option to turn on or off the signal that sounds at the end of the c...

More

Removing Odor or Smell - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Maintenance/Removing_Odor_or_Smell_-_Top_Load_Washer
Have you performed the "Clean Washer" cycle, or has the "Clean Washer" light come on? The Clean Washer cycle uses higher water volumes in combination with affresh ® washer cleaner or liquid chlorine b...

More

VIDEO: How HE High Efficiency Washers Work
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_How_HE_High_Efficiency_Washers_Work
How HE High Efficiency Whirlpool Washers Work

Door will not unlock - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Door_Issues/Door_will_not_unlock_-_Front_Load_Washer
Was the washer just installed? In some circumstances, your new washer may arrive with the door locked. This can occur from the normal shipping movement. CLICK HERE for more information on how to unloc...

More

Winter Storage Care - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Wash_Performance_or_Clothing_Results/Cleaning_and_Maintenance/Winter_Storage_Care_-_Front_Load_Washer
To avoid damage, install and store washer where it will not freeze. Put 1 qt. (1 L) of R.V.-type antifreeze in basket and run washer on RINSE & SPIN cycle for about 30 seconds to mix antifreeze and re...

More

How to Move the All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Cleaning_and_Maintenance/How_to_Move_the_All-In-One_Washer_Dryer
Disconnect drain hose from drain system and from back of washer/dryer. Bundle power cord with a rubber band or cable tie to keep it from hanging onto the ground. To avoid structural damage to your was...

More

How to Move the All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Cleaning_and_Maintenance/How_to_Move_the_All-In-One_Washer_Dryer
Disconnect drain hose from drain system and from back of washer/dryer. Bundle power cord with a rubber band or cable tie to keep it from hanging onto the ground. To avoid structural damage to your was...

More

LED Display and Settings - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Knob_or_Knob_and_Electronic_Control/2019_or_After/LED_Display_and_Settings_-_Front_Load_Washer
Factors such as load size, wash temperature, and water pressure may affect the time shown in the display. When you change the soil setting, the cycle time will increase or decrease in the Estimated Cy...

More

VIDEO: F0 E5 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/VIDEO%3A_F0_E5_Error_Code_for_Top_Load_Washers
F0 E5 Error Code for Whirlpool Top Load Washers

VIDEO: F0 E2 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F0_E2_Error_Code_for_Top_Load_Washers
F0 E2 Error Code for Whirlpool Top Load Washers

VIDEO: F5 E3 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F5_E3_Error_Code_for_Top_Load_Washers
F5 E3 Error Code for Whirlpool Top Load Washers

VIDEO: F5 E2 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F5_E2_Error_Code_for_Top_Load_Washers
F5 E2 Error Code for Whirlpool Top Load Washers

Rattling or Tapping Noise - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise_and_Vibration/Rattling_or_Tapping_Noise_-_Front_Load_Washer
CLICK HERE to listen to a sound clip on the sound of the washer inlet hoses rattling/banging against the cabinet. Try to rock the washer diagonally, from corner to corner, with your hands; adjust the ...

More

VIDEO: F0 E3 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F0_E3_Error_Code_for_Top_Load_Washers
F0 E3 Error Code for Top Load Washers

VIDEO: F2 E5 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F2_E5_Error_Code_for_Top_Load_Washers
F2 E5 Error Code for Whirlpool Top Load Washers

VIDEO: F3 E1 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F3_E1_Error_Code_for_Top_Load_Washers
F3 E1 Error Code for Whirlpool Top Load Washers

Casual, Heavy Duty, or Deep Water Wash - Water Level - Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Oasis)/Water_Level/Casual%2C_Heavy_Duty%2C_or_Deep_Water_Wash_-_Water_Level_-_Washer
The washer senses the size of the load and adds the correct amount of water for the load size. Opening the lid will put the washer into a pause, and you will have to press the start button to continue...

More

VIDEO: F3 E1 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F3_E1_Error_Code_for_Top_Load_Washers
F3 E1 Error Code for Whirlpool Top Load Washers

Cleaning the Interior - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Cleaning_and_Maintenance/Cleaning_the_Interior_-_All-In-One_Washer_Dryer
The Clean Washer with affresh® message will flash at the end of a wash cycle when the washer has run 30 wash cycles. If the Clean Washer with affresh® cycle is not run, the message will stop flashing ...

More

LCD Display and Settings - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Knob_or_Knob_and_Electronic_Control/2019_or_After/LCD_Display_and_Settings_-_Front_Load_Washer
Factors such as load size, wash temperature, and water pressure may affect the time shown in the display. When you change the soil setting, the cycle time will increase or decrease in the Estimated Cy...

More

VIDEO: F2 E3 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F2_E3_Error_Code_for_Top_Load_Washers
F2 E3 Error Code for Whirlpool Top Load Washers

VIDEO: F6 E3 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F6_E3_Error_Code_for_Top_Load_Washers
F6 E3 Error Code for Whirlpool Top Load Washers

lid - Error Code - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/lid/lid_-_Error_Code_-_Top_Load_Washer
Possible Solutions Is the lid open? Did the washer drain out? If lid (Lid opened) appears in display, the washer lid was left open. Close the lid to clear the display. If the lid is left open for more...

More

Lid Lock is Flashing - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Not_Starting_or_Not_Operating/Not_Starting_or_Operating/Lid_Lock_is_Flashing_-_Top_Load_Washer
If F8 E1 or LF (too long to fill) appears in the display, the washer is taking too long to fill or the washer is filling and draining. Any of these drain hose issues can cause the washer to siphon (fi...

More

VIDEO: F2 E4 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F2_E4_Error_Code_for_Top_Load_Washers
F2 E4 Error Code for Whirlpool Top Load Washers

VIDEO: F6 E2 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F6_E2_Error_Code_for_Top_Load_Washers
F6 E2 Error Code for Whirlpool Top Load Washers

VIDEO: F1 E1 Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F1_E1_Error_Code_for_Top_Load_Washers
F1 E1 Error Code for Whirlpool Top Load Washers

Removing Odors or Smells - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Wash_Performance_or_Clothing_Results/Cleaning_and_Maintenance/Removing_Odors_or_Smells_-_Front_Load_Washer
Have you performed the "Clean Washer" cycle, or has the "Clean Washer" light come on? The Clean Washer cycle uses higher water volumes in combination with affresh ® ​ washer cleaner or liquid chlorine...

More

1h, 2h, 3h....up to 12h - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/1h%2C_2h%2C_3h....up_to_12h/1h%2C_2h%2C_3h....up_to_12h_-_Front_Load_Washer
When the display shows a number up to 12, followed by an "h", it means that the Delay Wash has been activated. Most front load washers can be set to delay the wash for up to 8 or 12 hours (depending o...

More

Wash Cycle Knob - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Knob_or_Knob_and_Electronic_Control/2019_or_After/Wash_Cycle_Knob_-_Front_Load_Washer
NOTE: "CL" will display when the washer has run 30 wash cycles as a reminder to run the Clean Washer with affresh® cycle. Press the Wash Cycle Knob to activate the Extra Power option, which runs a col...

More

Not Starting or Not Operating - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Not_Starting_or_Not_Operating/Not_Starting_or_Not_Operating/Not_Starting_or_Not_Operating_-_Front_Load_Washer
This is a reminder that you have set the control lock and need to de-activate it to allow the washer controls to function. It is possible for the washer to be unboxed and the door to be locked. The do...

More

1. Power - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/Electronic_Control_above_Door/1._Power4.__LCD_Screen
How to Power ON the washer? Power Button - Press this button to turn the washer on and/or off What to Wash - Select the cycle Touch this button for three seconds to start the cycle, touch once to paus...

More

Power Button - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Control_Panel_Operation/LED_Control_in_Door/Power_Button/Power_Button_-_Front_Load_Washer
Touch to power up the washer. Touch again to turn the washer off.

Lid Lock is Solid Red - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Not_Starting_or_Not_Operating/Not_Starting_or_Operating/Lid_Lock_is_Solid_Red_-_Top_Load_Washer
The water valve inside the machine needs to have the “pressure” from both attached hoses in order for the washer to complete the cycle. If you want to save energy by not connecting to the hot water li...

More

Tumble Fresh™ Option - All-In-One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Control_Panel_Operation/Other_Buttons_or_Icons/Options/Tumble_Fresh%E2%84%A2_Option_-_All-In-One_Washer_Dryer
The Tumble Fresh™ option will periodically tumble the load after the end of the wash cycle for up to 12 hours. Tumble Fresh™ may be ended at any time by touching the “X” on the touch screen to the rig...

More

LdU - Error Code - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/LdU/LdU_-_Error_Code_-_Top_Load_Washer
Possible Solutions Are there items on the lid? If LdU (Lid cannot unlock) appears in display, the washer detects that there are objects on washer lid preventing it from unlocking. Remove objects, such...

More

Clothing is Tangled - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Cleaning_and_Clothing_Results/Cleaning_Performance_or_Clothing_Results_Questions/Clothing_is_Tangled_-_Top_Load_Washer
The wash load must be sorted before starting the washer. Mix different sized items together (such as shirts and pants) for a more balanced load. This washer automatically selects the spin speed based ...

More

Cleaning the Interior - Compact Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Compact_Front_Load_Washer/Cleaning_and_Maintenance/Cleaning_the_Interior__-_Compact_Front_Load_Washer
CLICK HERE for more information on the importance of using HE detergent Have you performed the "Clean Washer" cycle, or has the "Clean Washer" light come on? Run the Clean Washer cycle every month to ...

More

Whirling or Spinning Noise - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Noise_and_Vibration/Whirling_or_Spinning_Noise_-_Front_Load_Washer
If the load is not evenly distributed in the basket when spinning begins, the load will create movement in the basket which will result in noise and vibration. Try to rock the washer diagonally, from ...

More

Lid Lock is Solid Red - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers/Not_Starting_or_Not_Operating/Not_Starting_or_Operating/Lid_Lock_is_Solid_Red_-_Top_Load_Washer
The water valve inside the machine needs to have the “pressure” from both attached hoses in order for the washer to complete the cycle. If you want to save energy by not connecting to the hot water li...

More

Door Will Not Lock or Unlock - Front Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Door_Issues/Door_Will_Not_Lock_or_Unlock_-_Front_Load_Washer
CLICK HERE for more information on how to unlock your washer door when locked at the time of installation When using one of these cycles, the door will remain locked until the cancel button is pushed....

More

OL - Error Code - Top Load Washer
https://producthelp.whirlpool.com/Laundry/Washers/Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/OL/OL_-_Error_Code_-_Top_Load_Washer
Possible Solutions Is the Washer overloaded? If OL (overloaded) appears in display, the load too large. If an overload is detected, the washer will drain any water and detergent in the washer. Remove ...

More

VIDEO: F9 E1 or DRN Error Code for Top Load Washers
https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Videos/VIDEO%3A_F9_E1_or_DRN_Error_Code_for_Top_Load_Washers
F9 E1 or DRN Error Code for Whirlpool Top Load Washers

Removing Odors and Smells - All in One Washer Dryer
https://producthelp.whirlpool.com/Laundry/All-In-One_Washer_Dryer/Odor_or_Smell/Removing_Odor